It would be a mistake to say that there’s no learning curve at all on the E8.  It has one; it’s just not particularly steep.  Sure, there are a lot of settings, and a lot of things you can change, tweak and adjust, but honestly, the hardest part of its operation is going to be changing your preferred drink settings and familiarizing yourself with the way the menus work.
So I'm at my local Goodwill store and I was just getting ready to leave when one of the employees brought a cart out of the back with the Jura Capresso F9 sitting on it... I had drooled over their products online for quite a while now but sadly could not afford to drop 1900.00 (what they cost new) on an espresso machine. When I saw the F9 sitting on the cart I quickly grabbed it but noticed a tag on it that said "AS IS NO RETURN" and the price tag below reading $49.99. I was willing to take a chance & at $49.99 I figured I could always sell it for parts on an online auction and get my money back or even make a tiny profit if it didn't work. I got home and downloaded a manual plugged it in, programmed it, installed the filter (there were 4 new filters with it & that alone is worth the $49.99) added espresso beans & guess what it worked perfectly! I have since used it daily, mornings I have a quadruple espresso and evenings I have a latte with 2 shots... It's easy to clean & maintain and having paid only $49.99 I felt like I won the lottery ..
The first machine I received never worked correctly. The milk would not steam and the espresso would start to come out and then stop. Upon stopping a message would display on the screen asking to press a button to fill the pump. This would occur 2-3 times before an expresso could actually be made. I experimented with several different grind settings, coffee strength, water temperatures, etc, but with no success. The machine continued to pump a few drops of espresso, asking to refill the pump, and waste the previous grinds. I literally wasted 2-3 cans of Illy espresso without ever getting espresso. In addition, with each espresso cycle, a large amount of water would precede any espresso. For example on a 1oz shot, about 0.1oz would be water that didn't run through the coffee.
After extensive researching of current high(er) end coffee machines, I purchased the Jura C65 to replace my Jura F7 - which had finally failed after 11 years of reliable service. Set-up was fast and easy -- instruction booklet is well organized with useful diagrams. Am completing the 1st week of daily use: so far so good. The C65 produces excellent coffee. Controls are less complicated than my old F7, and it is easy to adjust to fit individual tastes -- strength, cup size, temperature, etc. Only fret is reliability -- will it match the duration of the F7?

It uses a stainless steel conical burr grinder to get your beans just right, and it has a high-pressure system to extract more flavor in less time. The foam frother is remarkable as it produces fine foam that will make your coffee look and taste so much better. You can clean the system out relatively easily, and it allows you to control the strength of your beverages. Finally, it has an energy saver mode, and it’s slimmer than other two-cup models.
I bought this for my wife and I admit that I thought it is crazy to spend this amount of cash on a glorified coffee pot. She already had a nice Breville expresso maker but didn't use it. Basically it was too hard to operate and clean. This machine is almost totally hands free. Push a button and get a coffee. Push a button and get a latte. At the end of the day turn it off and it rinses tiself. You only have to dump the grounds and clean the trays. I can't comment on reliability or durability but it makes awesome coffee. It is an extravagance but it you love expresso or latte and don't like hassle it is well worth the price.
Jura bean to cup coffee machines form a premium range that will appeal to readers with a higher budget level. With some machines moving up into the four figure range, they offer a high quality coffee to match that higher price tag. Many coffee lovers swear by the brand, as you would expect from a company that focuses on delivering high quality products.
As an anecdote, I once failed one of my shots, it happens to everyone. The biggest problem with that cup was that it had almost no crema. I sipped it anyway, I wanted to see how it was. I was absolutely stunned by the taste of that shot. The unique combination of tamping and grind size made that cup more flavorful. It just didn’t have enough crema. Never judge an espresso by its looks. This is why some people hate Nespresso with a passion, it is very consistent, and it gives you a great shot with ample crema every time, but it is never fantastic. I love “fantastic”, but for the convenience, I settle for good, so Nespresso is one of my favorite coffeemakers. If convenience is what you are looking for mostly, take a look at our article that compares capsule-based espresso machines.
That’s a pity because as auto-frothers go, it’s a very good one.  The one thing we’re not so crazy about is the fact that you’ve got to run plastic tubing from your milk source (you have to provide your own, by the way – you do not get one when you purchase the machine) to the frothing arm, which makes your very expensive coffee machine look like a high school science project.

This is where a fully automatic espresso machine comes in handy. Once you have set up the machine and tweaked all the settings, you can’t go wrong anymore. All preparation steps are fully automated, the dosage, the tamping, the grind size, temperature, extraction time, etc… You can expect consistent results, a great espresso shot every time. Maybe that’s why many restaurants decided to go with super automatic machines.


Like the best espresso machines found in restaurants and cafes, the Capresso EC100 uses bar pressure to extract the greatest flavor out of coffee grounds. You can use finely ground coffee, or for greater convenience on a busy morning, you can make use of the pre-packaged espresso coffee pods. You can brew two cups of espresso at the same time, and you can get your cups toasty warm to keep your beverage hot longer by placing them on the stainless steel cup-warming tray on top.
The ECAM28465 uses an integrated frothing system and the milk container in order to immediately deliver to your cup both the right amount of frothed or steamed milk and freshly brewed espresso. That’s not all though: you also get a dual stainless steel-lined thermoblock heating that provides steaming and brewing power for your various coffee drinks. Lastly, you can say goodbye to espresso and other drinks any metallic taste in your coffee that you probably got with other machines and that’s because the Prima Donna S features a stainless steel lining which prevents that from being the case.
You don’t really need to be a coffee connoisseur to be able to prepare your own drinks with this coffee machine. There are recipes for 12 coffee creations which you can select with the rotary switch. The machine uses images and texts to guide users through the preparation stages. You can prepare coffee choices such as Irish coffee, flavored latte macchiato, Viennese coffee, and Café Melange, amongst others. In addition, this coffee machine is also self cleaning to eliminate any excuses when it comes to making speciality coffee at home.

The Micro 1 in many ways is the Micro 9’s little brother. This simple, ultra compact Jura machine features a sleek black design that is both minimal and modern. With the Micro 1, Jura set out to make their smallest unit without sacrificing the power and quality they are known for. And after out tests with a demo unit, we can safely say that they succeeded.
Jura E8: Innovative technologies in the new JURA E line are revolutionizing the enjoyment of coffee. The One-Touch Cappuccino function on the Jura E8 Black one-touch espresso machine creates trend specialties such as latte macchiato, flat white and cappuccino at the touch of a button. The brewing process for ristretto and espresso has been 100% perfected. The Pulse Extraction Process (P.E.P.©) on the Jura E8 Black one-touch espresso machine is the only process of its kind in the world. It optimizes the extraction time and guarantees the very best aroma even for short specialty coffees.
We will be taking a look at nine of the different model lines of Jura’s Super Fully Automatic coffee machines. They also offer a professional level line of machines, if you’re interested, but we will be reviewing the full line of Jura’s home espresso-machines. The machines are generally classified in accordance with their features and functionality, as well as their size and general purpose.
If you’re not familiar with the term, TFT is a more high-tech version of a standard LCD. The colors are brighter, and the image is sharper, thus enabling you to see what you’re doing much more easily. The screen itself is 2.8 inches, and it uses a rotary dial to select the kind of coffee you like. What’s noticeable about the F8 is that it’s a full-service coffee maker, but it’s smaller than other models that Jura offers.

Jura machines all have self-cleaning technologies that prevent scaling, powder buildup, and other problems typical of the industry. That being said, you will need to become familiar with and regularly purchase self-cleaning fluids and tablets that the machine uses to maintain itself. These products are typically included on the page where you buy, but in the event that they are not, we have you covered in our reviews.

The Jura Super Automatic F50 pump driven espresso machine takes care of everything for the coffee lover with the push of a single button: it grinds the beans, brews the coffee and finally ejects the puck. In fact, due to its various functions, design and overall usability, it’s highly recommended for novice level baristas or people who want to conveniently prepare their coffee. Also, compared to a steam machine, the F50 uses a greater pressure and therefore makes your espresso taste a lot better.
This Jura Impressa F8 review is the first we’ve added to the site from the Swiss manufacturer. The first thing you notice is its classy appearance, in the ‘Piano Black’ colour scheme that’s going to make it look the part in any kitchen. As you read the review, it will become clear why the Impressa F8 has quickly taken the number three spot in our top ten models.
...I just bought this machine for my girlfriend's new kitchen. The water sensor in the water tank does not stay in place. Therefore, the machine cannot make coffee because it cannot determine whether or not there is any water in the tank. There is a tiny plastic cap that should hold the sensor in place. The cap doesn't clip in, and floats away as soon as the tank is filled. Therefore the entire machine doesn't work.
Jura does not make any budget-friendly machines, so you should come in expecting to make an investment. Prices range from $800 for a single cup machine, to above $5,000 for Jura’s top of the line model. You can always search for refurbished models, and Jura occasionally offers factory serviced machines that function like new, but have been returned to the company for unspecified reasons.
×