Some of the more popular mass market coffee machines are starting to look a little bit dated (not least the hugely popular and bestselling ESAM4200 by Delonghi), but that couldn’t be further from the truth with the Jura Impressa F8. It’s a very stylish and sophisticated looking machine, that wouldn’t look out of place in an upmarket cafe or bar. Jura have managed to pack a lot of controls in to the unit to give near unparalleled control over coffee making, yet retain a fairly minimalist look. There’s something about a black and silver finish that just looks the part, particularly on kitchen appliances that sit on the worktop – you don’t want something ugly to look at as a permanent fixture in the kitchen!


My daughter and her husband thought this was a great product. He likes his coffe real strong so can adjust it to his taste. She likes tea so the steamer is great for her. (I hear she is getting back into the cappacionos!) Also with dual spigots on the machine he can make 2 cups at a time for him and his best buddy in the early AM. I have'nt tried it yet, but when I do I'll give a report on it. This machine runs around $1200 new, I bought it refurbished for $400. Heck of a deal!

The first machine I received never worked correctly. The milk would not steam and the espresso would start to come out and then stop. Upon stopping a message would display on the screen asking to press a button to fill the pump. This would occur 2-3 times before an expresso could actually be made. I experimented with several different grind settings, coffee strength, water temperatures, etc, but with no success. The machine continued to pump a few drops of espresso, asking to refill the pump, and waste the previous grinds. I literally wasted 2-3 cans of Illy espresso without ever getting espresso. In addition, with each espresso cycle, a large amount of water would precede any espresso. For example on a 1oz shot, about 0.1oz would be water that didn't run through the coffee.
There's one other area needing fixing, not only in these machines but in all super automatics I've ever tried - tiny puck sizes (diameter) = bad extraction. That's not me saying it. That's Dr. Illy and a wide range of scientific tests that the Illy labs have done finding the optimal puck size for superior extraction. At 46mm, these pucks are too tiny.
As a home barista, you need to master all the above techniques to get the right espresso. If you make a little mistake you compromise your shot. As a result, you’ll get an average shot. Even if you know what it takes to get your shot right, there is very little room for error. Failed shots are pretty common with beginner baristas. You probably noticed in coffee shops that the shot differs from barista to barista.

To enable the filter and coffee machine to communicate, JURA uses modern RFID technology. Any machine fitted with the intelligent water system (I.W.S.®) recognises when a filter is inserted, automatically switches to filter mode and starts the rinsing process. When the filter capacity is nearly used up the machine prompts the user to change the filter. If the filter is not changed, the machine activates descaling mode. After a certain amount of use, the user is prompted to descale the machine. This can only be done when the filter is removed, so there is no more risk of user error resulting from misunderstandings.  

If I could say anything that would help you make a decision it is this: this is a stylish sexy machine that brews the perfect cup of coffee every single time! Cleaning is simple! The machine is QUIET! I would not trade this for a brand new installed Miele, well maybe if they swapped me even I would, but I've had many cups out of their machines and in all honesty the Jura is better! Don't be afraid of the refurbished machines! Buy this machine and enjoy it as much as my wife and I have ours! I hope this helped someone make a decision! If you are anything like my wife and I, the coffee machine is much more than an appliance! It's is a member of the family and in this family we take our coffee very seriously! We love each other and we love our Jura!!!
2) Overall, I have to say I absolutely LOVE this machine. Here's how I rationalized payment for such an expensive indulgence: if you figure a Starbucks costs approx. $3, and you buy one everyday (which I was), it would take 600 cups to break even. Well, with the automatic counter on my machine, I have made more than 1600 cups! This machine paid for itself in the first year..easily. ok, so now that you're past the issue of paying so much for a coffee machine, here's more...
Along with premium engineering, Capresso products are designed with high-end aesthetics in mind. Clean black trims, aesthetic curves, and clean stainless steel finishes are all common branding traits. Capresso products are also notably ergonomic, featuring comfortable handles, easily visible and extruded controls, and a notable lack of rough edges. With design awards to back it up, Capresso produces beautiful, innovative, and powerful coffee equipment.
Whether you like it regular, or ristretto, or long, or Americano, the espresso needs to be smooth. There is some slight bitterness, but it should be very faint. The taste should remind of caramel. If you don’t have any idea of the taste, just go to a good coffee shop and order one. Go for a few days, and try to explore different baristas, and different times of the day. This will give you a great idea. If you don’t like it, and you know the coffee shop is a good one, give up, this is not for you. Some people just don’t like espresso. My wife, for instance, will only accept one if there is no other coffee around. At the end of the day, you have to like it, and you should make it your own.

A “proper” machine that can deliver both single and double shot espressos, its spout has a dual opening allowing you to make two coffees simultaneously. There’s also a steam wand for foaming milk, and the water tank has a decent 1.2l capacity, meaning you won’t need to refill it after making three cups o’ joe. In addition to ground coffee, it’ll also accept E.S.E. coffee pods (we weren’t able to test these, but as they’re made in almost precisely the same way as regular espressos, we imagine they’ll work just fine).
There is a learning curve and one has to get the coffee to water ratio correct for one's preferences...changing it for other drinkers. But it is truly automatic, which is nice for serving more than one person quickly, brews quickly and makes very good coffee. Jura took this machine and rewired it per the wiring recall on this model, returned it, all at no cost to me.

09/16/2010 - The C1000 finally gave out after 10+ years and service fees of $250. With all lights now flashing and the loudest grinding noise ever, it was confirmed today with Jura-Capresso Customer Service that this unit is not worth their new $250 service fee to repair (if it could be repaired). I still found the C1000 a great appliance and Jura-Capresso a very reputable company. From a cost-analysis perspective (and these are ONLY estimates), I consume about 700 cups per year which requires about 20 pounds of beans at $10 per pound (Fresh Market) or $200 per year. Ten years worth of coffee beans cost about $2,000. Add the $900 cost of the C1000, plus two $125 service fees, my total investment was around $3,150. I excluded the cost of water since we pay a minimal fee, but never use the charged amount. Equivalent cups of pressure brewed coffee (about $3 per cup from Starbucks) over this ten year period would cost about $21,000. I compare Starbucks prices since there is a huge quality difference between their pressure-brewed coffee and drip coffee at your local food mart. So my break-even point with the Jura-Capresso C1000 was between one and two years. The remaining eight to nine years of coffee I consumed was at no cost (when compared to Starbucks). This analysis only includes the direct financial cost and not the cost of your time/fuel getting to Starbucks. I happily accepted Jura-Capresso’s "one-time replacement offer" to upgrade my C1000 to a new IMPRESSA C5. The list price is $999, but the upgrade cost is only $600. Although my C1000 unit has experienced problems, it continues to be the most awesome coffee machine ever! Once my IMPRESSA C5 machine arrives and has been used a short time, I will post a new product review.Read full review...
The Jura C60 has a fairly large water tank with a capacity of sixty four ounces. The bean hopper also has a respectable capacity of seven ounces and features an aroma preservation lid as well. As for the brew drawer, you won’t need to empty it too soon, since it can hold up to sixteen pucks of coffee. On top of that, the C60 also comes with a bypass doser, which means that on top of whole beans, you can also brew pre-ground coffee.
Jura were new for our 2017 updates on the site, and we fully expect them to feature highly in our top ten table for 2018, alongside the likes of the Melitta Caffeo Barista TS. With our early reviews, we put the majority of effort into the big names and big sellers, like the Delonghi Magnifica ESAM4200 that’s always near the top of the bestseller list on Amazon. Now that we’ve fairly comprehensively covered those, our attention is shifting towards the premium models that may not sell as many, but will really attract people that know their coffee, and Jura fit that description perfectly.
I love this machine. I also have a krupps super automatic as well and I prefer this one. One complaint though is that the spout height is slightly low and so I cannot fit certain mugs in there. Not a deal breaker but it is an inconvenience. The thing I like about the jura is the ability to bypass the whole bean grinder and use preground coffee. Since with any super automatic, you need to be very careful about the oiliness of the bean, this is a great feature when you still want flavored coffee. The interface isn't very difficult to learn and it is quite the beauty sitting on the counter.
Excellent work horse. We purchased the Jura-Capresso Impressa F9 16 years ago for a wedding present to us and we have never had any issues with it...it's an excellent product. We have sent it back to the maker to have it cleaned a couple of times over the years and the service has been fantastic. Don't let the price throw you off....it's worth every penny.
The Unpleasant: There is hardly anything negative about this sublime machine. Due to its small water reservoir, the Impressa Z7 was not designed for offices or households with multiple coffee drinkers. Furthermore, it may be inconvenient for individuals who drink several cups of coffee throughout the day since that would require frequent refilling of the reservoir. If you’re interested in one with a larger water tank, check out Jura-Capresso S8.

It might seem like a trivial point, but not all machines have thought about this. The Jura’s power cable emerges at the bottom of the rear of the machine, making it very easy to plug it in and neatly arrange any excess cable out of sight. There’s also a ‘master’ power switch in the same location – worth noting as we discovered, having thought the machine was dead on arrival after pressing the power button on top and nothing happening!
If you have some experience in the world of specialty coffee drinks, skip this short section in our Jura E8 coffee machine review, as you already know all of this.  If you’re new to the game and coming from the world of drip-brew coffee, keep reading, because there’s a key difference between how espresso is made versus how your beloved drip-brew machine works.

For those who tend to like their java a bit more robust and flavorful, this espresso machine offers a coffee and steam wand that you can use to adjust the potency of your coffee. If you prefer a bit less vigor to your morning espresso, simply move the wand to the steam side to add a bit more water. This will allow you to share your espresso maker with those around you who prefer a stronger or milder taste you do and still keep everyone happy.
Setup is way easier than the manual would have you believe - the pathetic printed booklet is by far the weakest link in this coffee production line. Fitting the water filter and the Smart Connect dongle is not explained well at all. You’ll find answers to most of your questions online - but probably not on JURA’s website. Unofficial YouTube videos proved much more useful.
Of course, this is not all and you get a wide range of other impressive functions, such as ceramic valve technology, pre-ground option for decaf, 1-touch cappuccino system, large bean hopper with sensor and adjustable height brew spouts. Therefore, if you’re looking for the ultimate in espresso machines, then you certainly need to consider the Jura XS90 and experience how the perfect espresso shot actually tastes like.
The 1150W DeLonghi ESAM3500.N is capable of preparing a wide range of coffee drinks, including lattes, cappuccinos, coffee, espresso and more. You can easily brew directly into the twelve oz cups, demitasse or espresso thanks to the height adjustable coffee spouts this model comes with. Thanks to the instant reheat function, keeping the ESAM3500.N at the right temperature is a breeze, regardless of the length of time between cups.
So what’s the coffee like? It’s tasty, especially if you stick with the simpler, non-milk varieties such as espresso, and comes out of the pods with a nice crema on the surface. You have very little control over how the coffee is made, of course, and aficionados using a £25 AeroPress will be able to beat the Jovia for taste every time. But this machine is so convenient and easy to live with that it charms you regardless.

Also, we went through a brief episode in which it would refuse to brew anything (as if it didn't have the power to punch the water through the puck of coffee). I remedied this with a descaling cycle as well as wiping out the parts above the removable tray thoroughly. (I use filtered water in the machine, but the descaling seems to be a more serious cleaning than the normal automatic cleaning.)
Jura has several coffee machines on the market at several different price points so if you were planning on investing in one (and they are an investment), we’d like to help you make sense of the different features and make clear what you gain and lose as you look at different models while deciding which one is the best fit for your kitchen. In this thorough Jura review guide, we are going to cover what makes the Jura so special and ultimately worth the money, what the best features of each unit are, what to look out for when deciding on a model, and most importantly which Jura coffee machine to buy.
A “proper” machine that can deliver both single and double shot espressos, its spout has a dual opening allowing you to make two coffees simultaneously. There’s also a steam wand for foaming milk, and the water tank has a decent 1.2l capacity, meaning you won’t need to refill it after making three cups o’ joe. In addition to ground coffee, it’ll also accept E.S.E. coffee pods (we weren’t able to test these, but as they’re made in almost precisely the same way as regular espressos, we imagine they’ll work just fine).
It might seem like a trivial point, but not all machines have thought about this. The Jura’s power cable emerges at the bottom of the rear of the machine, making it very easy to plug it in and neatly arrange any excess cable out of sight. There’s also a ‘master’ power switch in the same location – worth noting as we discovered, having thought the machine was dead on arrival after pressing the power button on top and nothing happening!

The first machine I received never worked correctly. The milk would not steam and the espresso would start to come out and then stop. Upon stopping a message would display on the screen asking to press a button to fill the pump. This would occur 2-3 times before an expresso could actually be made. I experimented with several different grind settings, coffee strength, water temperatures, etc, but with no success. The machine continued to pump a few drops of espresso, asking to refill the pump, and waste the previous grinds. I literally wasted 2-3 cans of Illy espresso without ever getting espresso. In addition, with each espresso cycle, a large amount of water would precede any espresso. For example on a 1oz shot, about 0.1oz would be water that didn't run through the coffee.

And that’s it. There’s very little in the way of cleaning or maintenance to be done, bar an occasional emptying of the drip tray, an occasional rinsing of the removable pod holder and, of course, the refilling of the water tank. The tank isn’t huge (0.8l), so you’ll need to do the latter fairly frequently. The drip tray, for its part, is adjustable – you can place it at one of three heights to suit the size of drinking vessel and reduce the chance of spillage.
The Unpleasant: There is hardly anything negative about this sublime machine. Due to its small water reservoir, the Impressa Z7 was not designed for offices or households with multiple coffee drinkers. Furthermore, it may be inconvenient for individuals who drink several cups of coffee throughout the day since that would require frequent refilling of the reservoir. If you’re interested in one with a larger water tank, check out Jura-Capresso S8.
To really own your drinks, Jura designed the Impressa Z6 super-automatic espresso machine to include three brew temperature and three hot water temperature settings, ten coffee strength settings and ten milk temperature settings. It’s rare that we see so much flexibility for coffee strength, and rarer still to see a wide range of milk temperatures. In truth, many machines don’t feature milk temperature settings at all, so we were excited to brew with the Z6, and it didn’t disappoint. The Impressa Z6 quickly ramps up from brew to steam temperature in a short six seconds, so it’s great for people like us, who need caffeine (and need it now!). For a more full-bodied espresso and decidedly thicker crema, the Impressa Z6 uses Jura’s proprietary Pulse Extraction Process, to fire short pulses of water through the grounds during brewing, in order to get the most out of the extraction. Jura’s innovative TFT display shows, in living color, your personal list of favorite drinks right on the main screen and ready to brew at the push of a button. A longer list of up to 21 customizable specialty drinks is browsable via the rotary switch, so you won’t step on anybody’s toes at the office programming a drink to your particular specifications.
Now we’ve looked at what the machine can do, let’s turn our attention to what really matters, what real life customers think. We’ve had a good look around at reviews on the web, and collated the common themes. Hopefully this will give you a real feel for what is good and not so good about this machine, with some battle testing thrown into our Jura Impressa F8 review!

...I just bought this machine for my girlfriend's new kitchen. The water sensor in the water tank does not stay in place. Therefore, the machine cannot make coffee because it cannot determine whether or not there is any water in the tank. There is a tiny plastic cap that should hold the sensor in place. The cap doesn't clip in, and floats away as soon as the tank is filled. Therefore the entire machine doesn't work.


Starting with the brew unit, the first thing to understand is that it’s not removable.  From a practical perspective, what that means for you is that about once a week, you’ll need to pop a cleansing tab into the bypass doser to clean the unit.  No big deal, but our personal preference is for removable units you can rinse by hand to ensure a thorough cleaning.

You can also make milky or foamed coffees, thanks to a tube that can be placed in a milk jug (or Panasonic’s own optional “Milktank” accessory). Or just have the machine squirt out hot water for tea-making. You can also tweak the amount of coffee, water and milk, and the temperature before a drink is made, and save up to four of these combinations on the machine as personal favourites.
Jura does not make any budget-friendly machines, so you should come in expecting to make an investment. Prices range from $800 for a single cup machine, to above $5,000 for Jura’s top of the line model. You can always search for refurbished models, and Jura occasionally offers factory serviced machines that function like new, but have been returned to the company for unspecified reasons.
×