The digital control panel makes it easy to play with the programmable menu settings, including coffee strength, temperature, auto off and start time. You can also prepare cappuccino and espressos without having to wait between them thanks to the double boiler system that the ESAM5500B features. Lastly, no matter what coffee you plan on using with it, it’s going to be properly ground thanks to the professional quality conical low pitch burr grinder.

Operation is dead simple with the three-button interface on the top of the machine where you select from thee user-defined cup sizes (espresso, lingo and ristretto) and two aroma levels. The special aroma preservation technology does a great job of keeping the beans fresh and the Aroma Plus grinder precisely grinds them to a consistent size every time. The intelligent pre-heating feature is going to ensure that the coffee is always hot and topped with a light and airy crema.
Our final Jura Coffee Maker is technically classified as an espresso maker. As such, it’s only designed for espressos, although you can experiment to make different kinds of beverages if you want. As an espresso machine, this unit is really impressive. If you have used other similar models, you will be impressed by the quality and convenience that the Ena Micro 1 offers.
For fairly basic (and moderately priced) super automatic espresso maker is a great product. This well-designed expresso machine produces four great beverages. The Saeco HD8911/47 Incanto Carafe Super Automatic Espresso Machine produces a four superior beverages automatically while being designed for user minimum maintenance. It has the styling and materials that mark it as a superior espresso machine.
The other thing to keep in mind is that the milk frother can be a little finicky. We discussed the fact that most frothers don’t (or can’t) heat the milk to the same level as the coffee, and this machine is no different. Also, cleaning the spout can be a little tricky. Overall, when buying the E6, just plan on spending some time to get to know it. Once you’ve mastered all of the little things, it will become second nature.

After extensive researching of current high(er) end coffee machines, I purchased the Jura C65 to replace my Jura F7 - which had finally failed after 11 years of reliable service. Set-up was fast and easy -- instruction booklet is well organized with useful diagrams. Am completing the 1st week of daily use: so far so good. The C65 produces excellent coffee. Controls are less complicated than my old F7, and it is easy to adjust to fit individual tastes -- strength, cup size, temperature, etc. Only fret is reliability -- will it match the duration of the F7?

Not trouble free, as they all seem to jam periodically, but easily fixed. Per J-C, the problem is using very oily beans, which we do as we love very dark, heavily roasted Starbucks beans. The part that jams is the press mechanism. When it expresses the puck, it clogs and won't go back up. This seems to be a criticism for many of its machines, but it's hardly a deal breaker.
The machine is very nice looking in person, very sleek. The instruction manual is pretty sparse on details. It has enough, but it's a little intimidating for a first time user. I took my time and found out that the programming is very user friendly and easy to use. I have ours on our counter with a cabinet overhead. When I fill water reservoir I do pull the machine a bit forward because the reservoir is deep and you have to lift it straight up. It's easy to do but you need a bit of clearance. The bean hopper is in the back, so I pull the machine forward a bit to fill that, as well. Very easy to do. One thing I wanted in the J9 was the option to use a water filter. I have hard water from our tap, and had been filling our DeLonghi from our filtered refrigerator dispenser, but that was cumbersome. With the Jura filter I can fill the deep reservoir right in the little bar sink I have next to the machine. I tested the water before and after, and the Jura filter definitely works to reduce hardness, which is important in keeping the machine free from mineral scale buildup. I think it will be well worth the expense of replacing the filters. It came with one filter and a couple of descaling tabs, which I have not had to use yet.
Before we get into the technical aspects of the two types of espresso machines, here’s what you really need to know. Semi-automatic espresso machines are going to be perfect for the espresso connoisseur. If you’re the type that really wants to get the best-quality and taste out of your espresso machine and don’t mind taking a little more time and effort out of your schedule, the semi-automatic espresso maker is going to be for you. It’s a little bit more work, but the key here is that you ultimately have more control over every subtle nuance that goes into your version of the perfect shot of espresso with a semi-automatic.
Although it may seem somewhat inconvenient, we like it because it makes it easier to clean the milk container. Other features that come with the ENA 9 include a sturdy conical burr grinder, an energy saver mode to keep your electricity bills under control, and customizable coffee strengths. Also, you can adjust the amount of water that comes out, both in your coffee or if you want to use the machine as a hot water dispenser.
Like other Jura machines, the spouts can be adjusted 2.6-4.4” to accommodate any size cup or beverage. We found the adjustable spout really handy in preventing and splashing or spillover onto the machine which limits clean up and also help create the perfect crema. We found the foam that the C65 produced to be incredibly light with almost a light, feather consistency. While the cost of this unit is slightly higher, our calculations had it paying for itself after only a few months. When we tracked the amount of coffee used and compared it to how much it would have been if purchased from a coffee shop, the Jura paid for itself quicker than you might expect. Not to mention these machines are incredibly well built and will last for years before ever needing to be repaired or serviced. And when that time does come, Jura has always been responsive and communicative which makes sending the unit in painless.
My daughter and her husband thought this was a great product. He likes his coffe real strong so can adjust it to his taste. She likes tea so the steamer is great for her. (I hear she is getting back into the cappacionos!) Also with dual spigots on the machine he can make 2 cups at a time for him and his best buddy in the early AM. I have'nt tried it yet, but when I do I'll give a report on it. This machine runs around $1200 new, I bought it refurbished for $400. Heck of a deal!
Best of all, thanks to a thermal coffee pot, if you don't polish off the whole pot right away, it will still stay piping hot hours after it was brewed. For $130, the MT600 from Capresso offers all these abilities plus is wrapped up into a snazzy brushed-metal-and-black-plastic frame. Sure, the MT600 won't deliver a truly sublime cup of drip-brewed coffee. For that there's no getting around splurging at least $200 and up for a more capable machine.
Some machines can be quite slow to work their way through programmes, but Jura have put a lot of thought into minimising these delays. The water heating tends to be the cause of the waits, so the F8’s solution is to heat it as it passes through the internal pipes of the machine. The technical detail is a bit beyond us, but it seems to work well. If you want to know more and like the geeky detail, give ‘Jura Thermoblock’ a Google!
The IMPRESSA C65 is a true workhorse when it comes to delivering amazing coffee and espresso drinks. Many reviewers have reported this model holding up for years in high-traffic environments where the machine is producing drinks throughout the day. Like all Jura coffee machines, the C65 is as simple as turning it on, selecting your drink, and having it ready to consume in under a minute. The simple and compact design of the IMPRESSA 65, coupled with its refined accents of matte and gloss make this unit memorable yet understated and perfect for any kitchen.
The Jura Capresso Impressa J5 will allow anyone who owns ones to quickly prepare coffee house drinks in the comfort of their home at their convenience. The customization possibilities with this espresso machine assure that everyone can have their favorite drink exactly as they like it. The shorter flow of coffee ensures that the coffee will be hot with more crème in the cup.
If you’ve been using espresso machines for quite a while now, then you are probably fully aware of what makes a good espresso machine. Running a fifteen-bar pressure into the grounds, the Jura C65 can easily extract the right flavor from your coffee beans. Better yet, you can use its wide range of programmable options in order to adjust the brewing temperatures with two levels to boot, coffee strength (in four levels) and also the amount of water used.
As previously mentioned, this grinder is a bit less sturdy than its new revision, the 565. The 560 has the same issues with its mechanical timer, with the grind mechanism starting before you have had a chance to set the time. This results in a somewhat inconsistent grind quantity. The hopper lid is also not completely airtight, so it isn’t recommended that you keep your beans in it for more than a few days. The same issue with static buildup is also present, and may lead to a messy countertop.
Turn, press, enjoy – that’s how easy it is to enter the world of IMPRESSA C65 With the one-switch operating concept of the Rotary Switch and the 11-language plain text display, it’s easy to create the perfect coffee every time. Thanks to the high-performance conical grinder, the beans are always freshly ground. The simple, compact design with its elegant combination of matte and gloss black gives the IMPRESSA C65 an imposing yet understated look in any surroundings.
×