The Capresso EC100 offers you the chance to get creative and add variety to your coffee drinks, not only with espresso shots but also with lattes and cappuccinos using this espresso machine's two-part frother. This espresso maker comes with a frothing sleeve that lets you swirl hot steam and air into your milk to make a rich and foamy topping for your cappuccinos. You can remove the frothing sleeve and use the underlying steam tube that puts hot steam into milk, making it possible to make lattes.
If the machine you choose doesn’t have a built-in milk frother, Jura’s Automatic Milk Frother If you click this link and make a purchase, we earn a commission at no additional cost to you. will prepare cold, warm, or hot milk foam for use in different espresso-based drinks. Operation of the frother is simple (just one touch), and the machine is designed to pair with any Jura coffee machine.
Jura machines all have self-cleaning technologies that prevent scaling, powder buildup, and other problems typical of the industry. That being said, you will need to become familiar with and regularly purchase self-cleaning fluids and tablets that the machine uses to maintain itself. These products are typically included on the page where you buy, but in the event that they are not, we have you covered in our reviews.
First, I really wanted to like this machine. The specs, design, functionality, were exactly what I was looking for in a super automatic espresso machine, however the machine failed to perform the basic task of making espresso. I found the display, programming, controls, and size of the water chamber to be good. The milk frothing system was cumbersome as it required you to attach tubes each time you wanted a milk drink. When the system worked, the steamed milk was hot and the consistency was great for cappuccinos and lattes. However, if the tube was not connected precisely (very little room for error) the consistency of the milk was poor. I ended up having to restart the process several times as the tubes were not connected properly or they came loose as the milk was pumped. The tubes also presented an issue with clean up in that they had to be cleaned after each use.
My first Jura was the F7. I bought it off of Ebay(new) and couldn't have been happier. I was so thrilled with it, that I bought another (F9) and gave my mom the F7 because it was such an awesome machine. It is really remarkable how the machine works. It took me a good 15+ cups to figure out how to make the coffee the way I like it. There are so many options on this machine that effect the taste: Grind, water temp, quantity of beans, quantity of water, etc.... In reference to the service I am amazed. When I received my new F9, I immediately had problems with a couple of the buttons. I called the service center and was on hold for 6-8 minutes. After about a 2 minute conversation with the representative they said that she would just send out a new machine and when I get it to send my old machine back in the box. They paid all postage. No credit card, nothing. I've never heard of such a service before. Absolutely Excellent. I couldn't be happier. It is a great machine that makes very good coffee and looks really nice on the kitchen counter. I love my Jura! As a matter of fact, I believe I am going to go and make myself a decaf latte right down.
The first thing that comes to mind to anyone who sees the Jura Impressa XS90 is “Wow”. That is because this espresso machine is so amazing, so packed with features and so good at making the perfect espresso, that words fail to describe how incredible it actually is. This is a commercial duty espresso machine that was designed for use in either a restaurant or an office and features the company’s popular 1-touch milk frothing system and 2 independent boilers (stainless steel).
Before we get into the technical aspects of the two types of espresso machines, here’s what you really need to know. Semi-automatic espresso machines are going to be perfect for the espresso connoisseur. If you’re the type that really wants to get the best-quality and taste out of your espresso machine and don’t mind taking a little more time and effort out of your schedule, the semi-automatic espresso maker is going to be for you. It’s a little bit more work, but the key here is that you ultimately have more control over every subtle nuance that goes into your version of the perfect shot of espresso with a semi-automatic.

To enable the filter and coffee machine to communicate, JURA uses modern RFID technology. Any machine fitted with the intelligent water system (I.W.S.®) recognises when a filter is inserted, automatically switches to filter mode and starts the rinsing process. When the filter capacity is nearly used up the machine prompts the user to change the filter. If the filter is not changed, the machine activates descaling mode. After a certain amount of use, the user is prompted to descale the machine. This can only be done when the filter is removed, so there is no more risk of user error resulting from misunderstandings.
The ENA Micro 1 is the simplest of all of Jura’s machines. It is the smallest machine on the list, the most affordable, and packed with the base technologies in Jura’s machines. Your beverage begins by grinding whole coffee beans in a multi-level grinder, which are then pushed through a micro brewing unit. The machine delivers a rich espresso, with a soft layer of crema on top.
The new Gaggia Brera is a very impressive super automatic espresso machine that has a small form factor, making it perfect for use on small kitchen countertops. Not only that, but it seems that the company has focused, among other things, to ensure that the Brera fully maximizes user convenience. For instance, the water tank, drop tray and the dregs drawer are all within reach and can be easily accessed from the machine for simple, swift maintenance and regular cleaning. With this model, beverage selection and machine programming has been greatly simplified, allowing users to easily navigate through the options which are certainly more than you’d expect from such a small machine.
These machines and their respective technologies will serve you well, no matter what it is you are looking for. Keep in mind that with all their features and functionality, more expensive machines are almost always going to fall on the side of excessive for casual users. Because of this and their high cost, you may want to pick a few features that stand out to you and forgo the unnecessary frills.
1) After much research, I purchased the F9 at Williams Sonoma, primarily because they used to have a policy that you could return anything, at any time, if needed. So, I figured that if ever I had an issue, I could just return it to my local Williams Sonoma and get a replacement rather than returning the machine to the factory and waiting. Turns out I did indeed have to do this once for an electrical issue, which was actually an issue I had with the wiring at the outlet--not the machine afterall! In any event, I don't think Williams Sonoma still has that same open-ended return policy. Be sure to research the return policy wherever you make your purchase!
The Unpleasant: There is hardly anything negative about this sublime machine. Due to its small water reservoir, the Impressa Z7 was not designed for offices or households with multiple coffee drinkers. Furthermore, it may be inconvenient for individuals who drink several cups of coffee throughout the day since that would require frequent refilling of the reservoir. If you’re interested in one with a larger water tank, check out Jura-Capresso S8.
Thinking that I must have received a defective unit, I requested an exchange from Amazon. I had a replacement unit the next day!! Amazon is amazing in this regard. The second unit worked well for the first week and then the same issue with the espresso not coming out and having to press the button to refill the pump started occurring again. More wasted espresso!!
To enable the filter and coffee machine to communicate, JURA uses modern RFID technology. Any machine fitted with the intelligent water system (I.W.S.®) recognises when a filter is inserted, automatically switches to filter mode and starts the rinsing process. When the filter capacity is nearly used up the machine prompts the user to change the filter. If the filter is not changed, the machine activates descaling mode. After a certain amount of use, the user is prompted to descale the machine. This can only be done when the filter is removed, so there is no more risk of user error resulting from misunderstandings.
With the Impressa C9, you get programmed beverage buttons for espresso, cappuccino, coffee, hot water or milk. A 14oz. milk container is included and a burr grinder is built-into the machine. The 64-ounce removable water tank is easy to clean, and the ThermoBlock heating system keeps water at the optimal temperature. With an 18-bar power pump, this machine brews fantastic espresso.
This super-automatic Jura Capresso ENA 5 coffee machine does produce a tasty cup of coffee, no doubt about it. But we are concerned about its ability to hold up under pressure (literally, with flying milk nozzles!). For the kind of cash that this machine requires, most customers would likely be happier with another Jura model (the S9, perhaps) or another brand of super-automatic coffee machine.
×