When you think of other “one-touch” coffee solutions on the market, what typically comes to mind are single serve coffee machines that utilize K-cups or some other kind of coffee pod. While these definitely changed the game when first introduced, they leave a lot to be desired in terms of waste and the Jura has evolved past them. K-cups and coffee pods produce an extreme amount of plastic, cardboard and foil that is filling up landfills as at a rapid pace. Not to mention, by the time the coffee gets to your machine, the grounds have been sitting on the shelf for months and are most likely very stale.
I bought this for my wife and I admit that I thought it is crazy to spend this amount of cash on a glorified coffee pot. She already had a nice Breville expresso maker but didn't use it. Basically it was too hard to operate and clean. This machine is almost totally hands free. Push a button and get a coffee. Push a button and get a latte. At the end of the day turn it off and it rinses tiself. You only have to dump the grounds and clean the trays. I can't comment on reliability or durability but it makes awesome coffee. It is an extravagance but it you love expresso or latte and don't like hassle it is well worth the price.

Strength and temperature selection for a precise cup – The unit has four selections for the strength of coffee you want and lets you control the brew temperature for different drinks. This is a great way to customize a cup of coffee for guests and family. Instead of a pot evaporating away on the heater all day, just dial in the strength desired and 60 seconds later, you have your perfect cup of coffee.
The Jura E8 superautomatic espresso machine utilizes a single aluminum boiler, lined with stainless steel and featuring Thermoblock technology for rapid heating.  We prefer systems with two boilers, which allow you to simultaneously brew coffee and steam milk because single-boiler systems increase your total brewing time for milk-based drinks as the single boiler needs time to switch from one task to the other.
I have had a Capresso C3000 super automatic for many years that I was starting to have some minor problems with (small water leak, tray sensors corroding) and decided it was time to get a replacement. I work from home and tend to drink coffee most of the day so I'm looking for something that works reliably and for a very extend period of time. I started looking at the new super automatics from the Jura Capresso based on the longevity of the old C3000. I will admit, it's the TFT display that really caught my eye on this one. I started looking thinking that I'd end up with a Z series, but the TFT display was what veered me over to this one.
Also, we went through a brief episode in which it would refuse to brew anything (as if it didn't have the power to punch the water through the puck of coffee). I remedied this with a descaling cycle as well as wiping out the parts above the removable tray thoroughly. (I use filtered water in the machine, but the descaling seems to be a more serious cleaning than the normal automatic cleaning.)
The Achilles heel of any super automatic, brewing times are, in my opinion, far too short for proper extraction of the good stuff from ground coffee. Part of the problem is the puck diameter - 46ml in the Jura Capresso S9. The other problem (and I blame the Swiss for this and their gosh darn love for caffe suise), is that the grinder can't be dialed fine enough.
This is probably one of the more important points to note – just how easy it is to get started. Bean to cup coffee machines tend to fall into two categories, they are either easy to use but inflexible, or take time to master and give a lot of opportunity to experiment. This Jura machine gives a lot of scope to both, which is great if you’re short on practice time or not sure if you’ve got the skills needed just yet.
Also, we went through a brief episode in which it would refuse to brew anything (as if it didn't have the power to punch the water through the puck of coffee). I remedied this with a descaling cycle as well as wiping out the parts above the removable tray thoroughly. (I use filtered water in the machine, but the descaling seems to be a more serious cleaning than the normal automatic cleaning.)
09/16/2010 - The C1000 finally gave out after 10+ years and service fees of $250. With all lights now flashing and the loudest grinding noise ever, it was confirmed today with Jura-Capresso Customer Service that this unit is not worth their new $250 service fee to repair (if it could be repaired). I still found the C1000 a great appliance and Jura-Capresso a very reputable company. From a cost-analysis perspective (and these are ONLY estimates), I consume about 700 cups per year which requires about 20 pounds of beans at $10 per pound (Fresh Market) or $200 per year. Ten years worth of coffee beans cost about $2,000. Add the $900 cost of the C1000, plus two $125 service fees, my total investment was around $3,150. I excluded the cost of water since we pay a minimal fee, but never use the charged amount. Equivalent cups of pressure brewed coffee (about $3 per cup from Starbucks) over this ten year period would cost about $21,000. I compare Starbucks prices since there is a huge quality difference between their pressure-brewed coffee and drip coffee at your local food mart. So my break-even point with the Jura-Capresso C1000 was between one and two years. The remaining eight to nine years of coffee I consumed was at no cost (when compared to Starbucks). This analysis only includes the direct financial cost and not the cost of your time/fuel getting to Starbucks. I happily accepted Jura-Capresso’s "one-time replacement offer" to upgrade my C1000 to a new IMPRESSA C5. The list price is $999, but the upgrade cost is only $600. Although my C1000 unit has experienced problems, it continues to be the most awesome coffee machine ever! Once my IMPRESSA C5 machine arrives and has been used a short time, I will post a new product review.Read full review...
09/16/2010 - The C1000 finally gave out after 10+ years and service fees of $250. With all lights now flashing and the loudest grinding noise ever, it was confirmed today with Jura-Capresso Customer Service that this unit is not worth their new $250 service fee to repair (if it could be repaired). I still found the C1000 a great appliance and Jura-Capresso a very reputable company. From a cost-analysis perspective (and these are ONLY estimates), I consume about 700 cups per year which requires about 20 pounds of beans at $10 per pound (Fresh Market) or $200 per year. Ten years worth of coffee beans cost about $2,000. Add the $900 cost of the C1000, plus two $125 service fees, my total investment was around $3,150. I excluded the cost of water since we pay a minimal fee, but never use the charged amount. Equivalent cups of pressure brewed coffee (about $3 per cup from Starbucks) over this ten year period would cost about $21,000. I compare Starbucks prices since there is a huge quality difference between their pressure-brewed coffee and drip coffee at your local food mart. So my break-even point with the Jura-Capresso C1000 was between one and two years. The remaining eight to nine years of coffee I consumed was at no cost (when compared to Starbucks). This analysis only includes the direct financial cost and not the cost of your time/fuel getting to Starbucks. I happily accepted Jura-Capresso’s "one-time replacement offer" to upgrade my C1000 to a new IMPRESSA C5. The list price is $999, but the upgrade cost is only $600. Although my C1000 unit has experienced problems, it continues to be the most awesome coffee machine ever! Once my IMPRESSA C5 machine arrives and has been used a short time, I will post a new product review.Read full review...

Instead of an LCD screen, this model uses a standard LED to show you what kind of coffee you’re making. It’s not quite as involved, but it’s helpful and better than a manual version. With the ENA 9, you can make six different kinds of coffee. It uses two nozzles to layer your beverages perfectly with foam or milk. The frother is a separate unit that connects to the base machine.
Capresso offers a significant list of help resources that include comparison charts, instruction booklets, quick-reference guides and a list of FAQs. In addition, the company offers information on its warranties and product registration. You can contact Capresso using its toll-free customer service hotline. The nice thing about this company's customer service is that there are people available to answer your questions on Saturdays.
2) Overall, I have to say I absolutely LOVE this machine. Here's how I rationalized payment for such an expensive indulgence: if you figure a Starbucks costs approx. $3, and you buy one everyday (which I was), it would take 600 cups to break even. Well, with the automatic counter on my machine, I have made more than 1600 cups! This machine paid for itself in the first year..easily. ok, so now that you're past the issue of paying so much for a coffee machine, here's more...
Jura’s Impressa C65 uses a one-switch operating system and simple user interface for fool-proof coffee brewing. Multiple strength settings allow you to customize your coffee drink for the perfect espresso, cappuccino, or macchiato at the push of a button. Its height-adjustable coffee spout adjusts from 2.6 to 4.4 inches to be compatible with coffee mugs of all sizes.
4) The coffee and espresso are great. I've learned to make a latte just like Starbuck's and I haven't been back since. Some people complain that the frother doesn't work well, but here's the trick: first, you should use non-fat or low-fat milk. For some reason, lower fat milk froths better every time; second, be sure to clean the frothing nozzle after each use. Kind of a no-brainer, I know. Third, there are two settings on the frother, and you can change the setting by sliding the sleeve on the frothing tip up or down. Experiment with this and you will get the perfect froth, really.

If the machine you choose doesn’t have a built-in milk frother, Jura’s Automatic Milk Frother If you click this link and make a purchase, we earn a commission at no additional cost to you. will prepare cold, warm, or hot milk foam for use in different espresso-based drinks. Operation of the frother is simple (just one touch), and the machine is designed to pair with any Jura coffee machine.


For those really into their coffee drinks, and I mean obsessively so, a separate grinder is an absolute must. That loud noise you hear in the coffee shop every time you go in? That’s the grinder. Now, after saying that, let me tell you the grinder in the F7 is quiet and fast. So don’t worry about your kitchen ending up sounding like a coffee shop’s barista station.

You also get programmable push-button controls for milk, hot water and espresso outputs and given the fact that the 1003380 Accademia dispenses great beverages on demand, it’s great for those who don’t like to wait for long before their drink is ready. In total, there are 7 buttons that you can use in order to prepare one of the following drinks hot water, latte macchiato, latte, cappuccino, cafe lungo, cafe and of course, espresso.
×