Jura does not make any budget-friendly machines, so you should come in expecting to make an investment. Prices range from $800 for a single cup machine, to above $5,000 for Jura’s top of the line model. You can always search for refurbished models, and Jura occasionally offers factory serviced machines that function like new, but have been returned to the company for unspecified reasons.
It uses a stainless steel conical burr grinder to get your beans just right, and it has a high-pressure system to extract more flavor in less time. The foam frother is remarkable as it produces fine foam that will make your coffee look and taste so much better. You can clean the system out relatively easily, and it allows you to control the strength of your beverages. Finally, it has an energy saver mode, and it’s slimmer than other two-cup models.
I bought this for my wife and I admit that I thought it is crazy to spend this amount of cash on a glorified coffee pot. She already had a nice Breville expresso maker but didn't use it. Basically it was too hard to operate and clean. This machine is almost totally hands free. Push a button and get a coffee. Push a button and get a latte. At the end of the day turn it off and it rinses tiself. You only have to dump the grounds and clean the trays. I can't comment on reliability or durability but it makes awesome coffee. It is an extravagance but it you love expresso or latte and don't like hassle it is well worth the price.
Due to the lower register of the running motor, the Capresso 503.05 is much quieter than most blade grinders; this machine isn’t likely to wake up your family in the morning. Great build quality and fantastic machining make this one of the most durable blade grinders available.Despite the attractive design, fantastic build quality, and convenient features, this is still just a blade grinder.
Any coffee-based beverage is only going to be as enjoyable as the beans that are used to make it. If you don’t already, you will need to source high-quality, whole coffee beans and drink enough coffee to make sure that those beans aren’t going stale. You can use any beans that you like, but small batch and single-origin coffee beans are going to make a world of difference over bulk and mass-produced coffee beans.
This is where a fully automatic espresso machine comes in handy. Once you have set up the machine and tweaked all the settings, you can’t go wrong anymore. All preparation steps are fully automated, the dosage, the tamping, the grind size, temperature, extraction time, etc… You can expect consistent results, a great espresso shot every time. Maybe that’s why many restaurants decided to go with super automatic machines.
We found the Jura J9 to be intuitive to navigate and the state of the art TFT display which features text and images, combined with the rotary selector makes choosing your beverage simple. A standout feature of this model if the “fine foam” technology which utilizes three bars in the frother spout which acts to slow down the foam as it exits the frother so its poured at the right speed and evenly into the cup. The stainless steel vacuum milk container that feeds the frother warms the milk or cream and is easy to clean. The hardened steel grinding heads of the built-in canonical grinder deliver precision ground coffee every single time. There isn’t a single thing the IMPRESSA J9 doesn’t do well and it probably the most well-rounded model on our list.

With the Impressa C9, you get programmed beverage buttons for espresso, cappuccino, coffee, hot water or milk. A 14oz. milk container is included and a burr grinder is built-into the machine. The 64-ounce removable water tank is easy to clean, and the ThermoBlock heating system keeps water at the optimal temperature. With an 18-bar power pump, this machine brews fantastic espresso.

Some of the more popular mass market coffee machines are starting to look a little bit dated (not least the hugely popular and bestselling ESAM4200 by Delonghi), but that couldn’t be further from the truth with the Jura Impressa F8. It’s a very stylish and sophisticated looking machine, that wouldn’t look out of place in an upmarket cafe or bar. Jura have managed to pack a lot of controls in to the unit to give near unparalleled control over coffee making, yet retain a fairly minimalist look. There’s something about a black and silver finish that just looks the part, particularly on kitchen appliances that sit on the worktop – you don’t want something ugly to look at as a permanent fixture in the kitchen!
The first machine I received never worked correctly. The milk would not steam and the espresso would start to come out and then stop. Upon stopping a message would display on the screen asking to press a button to fill the pump. This would occur 2-3 times before an expresso could actually be made. I experimented with several different grind settings, coffee strength, water temperatures, etc, but with no success. The machine continued to pump a few drops of espresso, asking to refill the pump, and waste the previous grinds. I literally wasted 2-3 cans of Illy espresso without ever getting espresso. In addition, with each espresso cycle, a large amount of water would precede any espresso. For example on a 1oz shot, about 0.1oz would be water that didn't run through the coffee.
When prompted by the machine that it’s time to clean, find the “clean” option under the various cleaning programs and be prepared to follow the instructions it gives you. This is usually as quick as emptying the grounds tray and pressing the rotary dial one more time. Please a cup or jug under the spout to capture the cleaning waste that will be dispelled from the machine. You will hear the machine perform an initial rinse, and then prompt you to add the cleaning tablet which will be inserted into the pre-ground coffee compartment. After another push of the rotary button, the machine will go through an approximately 20 minute cycle so you’ll want to do it when you have a bit of time.
1) After much research, I purchased the F9 at Williams Sonoma, primarily because they used to have a policy that you could return anything, at any time, if needed. So, I figured that if ever I had an issue, I could just return it to my local Williams Sonoma and get a replacement rather than returning the machine to the factory and waiting. Turns out I did indeed have to do this once for an electrical issue, which was actually an issue I had with the wiring at the outlet--not the machine afterall! In any event, I don't think Williams Sonoma still has that same open-ended return policy. Be sure to research the return policy wherever you make your purchase!

There's one other area needing fixing, not only in these machines but in all super automatics I've ever tried - tiny puck sizes (diameter) = bad extraction. That's not me saying it. That's Dr. Illy and a wide range of scientific tests that the Illy labs have done finding the optimal puck size for superior extraction. At 46mm, these pucks are too tiny.
I received my machine on Jan 20th. I have to say it was a huge let down. Niether the coffee or milk were hot enough. I would think spending this amount of money on a coffee machine you should at least get hot coffee and milk without having to use cupwarmer or running hot water through it. I will say that amazon was a pure joy to work with on the return. They made everything simple and easy with no fuss. Thank you amazon for that.

This Jura Impressa F8 review is the first we’ve added to the site from the Swiss manufacturer. The first thing you notice is its classy appearance, in the ‘Piano Black’ colour scheme that’s going to make it look the part in any kitchen. As you read the review, it will become clear why the Impressa F8 has quickly taken the number three spot in our top ten models.
Aside from the flexibility of using either the supplied gold filter or store-bought paper ones, the Capresso MT600 sports other thoughtful extras. For instance, the right side of the water tower not only features a graduated water indicator which is a staple for these type of products, but its tank fluid gauge boasts a floating red bead that makes it a cinch to see exactly where the water line is in relation to its 10 cup capacity. Frankly, it's a trick I wish other coffee makers employed.
With the look of a shrink-rayed professional espresso machine, the grinning fizzog of shaven-headed culinary chemist Heston Blumenthal on the box and a price tag that puts it out of reach of all but the most well-heeled caffeine fiend, the Barista Express (branded as Breville in the US and Sage in the UK) is clearly aimed at those seeking a major step up in their home-brewed coffee.
The ECAM26455M features dual stainless steel-lined thermoblock heating in order to provide steaming and brewing power for your espresso and other drinks you wish to prepare with it with a very low cycling time. Compared to regular boiler systems, the thermoblock system is capable of much lower warm-up times paired with on-demand and efficient water usage.
You also get programmable push-button controls for milk, hot water and espresso outputs and given the fact that the 1003380 Accademia dispenses great beverages on demand, it’s great for those who don’t like to wait for long before their drink is ready. In total, there are 7 buttons that you can use in order to prepare one of the following drinks hot water, latte macchiato, latte, cappuccino, cafe lungo, cafe and of course, espresso.
×