Six years and 7540 shots of espresso. The only downside of this machine is that it is too easy to use so that you end up drinking more cups than you might otherwise. It's very fast to heat up, both for the main heating block, as well as for steam. The steamer wand takes some practice to get good, tight foam, but once you figure out the technique it's not difficult. The openings in the wand can clog up if you don't wipe it down right after use. I also give a short blast of steam right after that as well. After about five years we bundled it up and sent it in to the factory for cleaning and reconditioning. It came back as good as new and it's still going strong. About the only real negative aspect to the machine is that it tends to be a bit noisy, but probably no more so than someone using a fully manual pull machine and grinder.
With the Impressa C9, you get programmed beverage buttons for espresso, cappuccino, coffee, hot water or milk. A 14oz. milk container is included and a burr grinder is built-into the machine. The 64-ounce removable water tank is easy to clean, and the ThermoBlock heating system keeps water at the optimal temperature. With an 18-bar power pump, this machine brews fantastic espresso.
The ESAM5500B from DeLonghi allows you to finally be your own barista and enjoy delicious lattes and cappuccinos anytime. This model comes with a patented milk container, so if you love Italian drinks and would like to prepare them at home, then the ESAM5500B can easily help you prepare them. All you need to do is slide it onto the front of the espresso machine, place your favorite cup under the nozzle and then press the button corresponding to the type of drink you want to prepare. After that, the machine is going to take care of everything for you. Given the fact that it can be detached easily, you can place the milk container in the refrigerator after each use.
That’s a pity because as auto-frothers go, it’s a very good one.  The one thing we’re not so crazy about is the fact that you’ve got to run plastic tubing from your milk source (you have to provide your own, by the way – you do not get one when you purchase the machine) to the frothing arm, which makes your very expensive coffee machine look like a high school science project.

The machine is very nice looking in person, very sleek. The instruction manual is pretty sparse on details. It has enough, but it's a little intimidating for a first time user. I took my time and found out that the programming is very user friendly and easy to use. I have ours on our counter with a cabinet overhead. When I fill water reservoir I do pull the machine a bit forward because the reservoir is deep and you have to lift it straight up. It's easy to do but you need a bit of clearance. The bean hopper is in the back, so I pull the machine forward a bit to fill that, as well. Very easy to do. One thing I wanted in the J9 was the option to use a water filter. I have hard water from our tap, and had been filling our DeLonghi from our filtered refrigerator dispenser, but that was cumbersome. With the Jura filter I can fill the deep reservoir right in the little bar sink I have next to the machine. I tested the water before and after, and the Jura filter definitely works to reduce hardness, which is important in keeping the machine free from mineral scale buildup. I think it will be well worth the expense of replacing the filters. It came with one filter and a couple of descaling tabs, which I have not had to use yet.


First of all, let me say up front that we searched for a long time before we decided on the F7. My wife is a Latte-holic and a good chunk of our budget went to the local coffee house on her way to work. I like a good cup of Java myself and so we pondered the question if an automatic home brewer would be a good investment? In short, YES. Membership wholesale places like C*stco are a great place to buy and return if you do not like a product. How ever, you are usually limited to only one or two models on the shelf. We went through several semi/full automatic coffee makers at our local mega store and had to return all of them for one or other reason. Mainly value vs. function and mostly- can it brew a good cup of coffee or Latte. For sake of keeping this review short I evaluated all factors in my decision for all candidates including: pressure in bar or psi, heating element, grinder, steam output, cleaning functions, easy of use, program functions, other reviews, and so on. We really liked the F7 and decided to buy it refurbished for $ 699 at 1st in coffee online through Amazon which included a return policy.
02/12/2000 - Purchased Capresso C1000 unit at William-Sonoma for $899. Manually cleaning the internal screen after every few cycles is no big deal. The User’s Manual documentation is a bit over-engineered and could be simplified or reformatted for easier reading and troubleshooting. You do not want to use oily coffee beans as they will stick together and clog the burr grinder. The grinder is also bit noisy, yet produces the perfect cup of pressure-brewed coffee or espresso every time. After using this for a week, I’ve never enjoyed coffee from anyone else including formal restaurants. It was initially pricey but definitely worth every cup.

The Jura Giga 5 home coffee machine is fully loaded with features. It has a combined power of two professional ceramic grinders and two heating systems, enabling it to prepare specialty coffee extremely well. The two grinders are made from a wear-free ceramic and guarantees quick, accurate and consistent grinding. There are electronically controlled motors that can adjust the consistency of the grind during short grinding processes.


Jura is a premium brand that specialises in automatic coffee machines. With the majority of their models costing over £1000 - and some as much as £3700 - their target market is coffee enthusiasts who are willing to pay more for the best coffee. On this page, we'll go through some of the best Jura bean-to-cup coffee machines, along with reviews of why we think they are excellent models.
The digital control panel makes it easy to play with the programmable menu settings, including coffee strength, temperature, auto off and start time. You can also prepare cappuccino and espressos without having to wait between them thanks to the double boiler system that the ESAM5500B features. Lastly, no matter what coffee you plan on using with it, it’s going to be properly ground thanks to the professional quality conical low pitch burr grinder.
The buttons of the Jura XS90 can be easily programmed for setting volume, strength and temperature of the espresso dispensed. If you take a closer look at the right side of the XS90, you’ll notice that the multi function button is perfect for programming the lattes or cappuccino, including the strength and amount of milk, but also the temperature of espresso dispensed. If you want, then you can even adjust the milk’s foaminess.
The ultra-modern frother technology prepares milk foam of unprecedented quality. The foam is both fine and compact, giving it a creamy consistency with a subtle sweetness. The frothers have two separate chambers in which the milk is frothed twice. Any bubbles that form will burst, compacting the foam and making it extremely fine. Three bars in the frother spout slow down the foam as it exits the frother, so it is poured slowly and evenly into the cup.
Coffee & Espresso Machines - Touch-button convenience, sophisticated styling and customized options like no other. The Jura Capresso Impressa F7 Automatic Coffee Center Espresso Machine creates delicious, perfectly tailored drinks with less preparation time and less noise. The commercial-grade specially angled internal coffee grinder is now twice as fast. With the full programmability of the Jura F-line, the espresso maker customizes your coffee - all with automatic or push-button ease and without even moving the cup. The high performance 18-bar pump with 1,450-watt stainless-steel lined Thermoblock heating system ensures fast, energy efficiency. Espresso maker's 10-digit LED display dialog system shows brew strength and cup size while brewing. DualFrother PLUS smoothly froths and steams milk of the finest quality and consistency. Sleek, symmetrical design fits in any kitchen or office, right under the cabinet. Product Features 18-bar pump with 1450-watt stainless-steel lined Thermoblock heating system for fast, - Specifications Made in Switzerland Material: ABS, polypropylene, stainless-steel, matte chrome plating Model: 13709 Capacity: 64 oz. Watts: 1700 / 110 Volts Size: 11" W x 17.5 D x 14" H Weight: 25 lb. Use and Care Housing wipes clean with damp cloth. Rinse and refill water tank daily.
The Aroma G3 grinder uses conical steel burrs and six degrees of fineness to grind quickly, thanks to the perfected cutting angles that produce 60% less residual grounds. The result is a quieter grinder that preserves more of the flavor and aroma of the freshly ground beans while operating twice as fast. An integrated bypass doser allows for pre-ground coffee brewing.
Hardcore coffee aficionados know what they can expect from the Jura Capresso. The company, formerly known as Capresso Inc., is based in Closter, New Jersey. It is known for the design, manufacture, and sale of coffee equipment. As most Jura coffee machine reviews would tell you, any coffee machine that has the Jura name on it boasts of elegant design and topnotch features.

To that end, the MT600 will attempt to keep track of when you last dropped in a fresh charcoal pack. Just press the "filter" button on the control panel, and after six weeks an associated green light will begin blinking. If you unplug the machine, however, all bets are off, as the clock and internal filter replacement timer lose track when power is lost.
Jura E8: Innovative technologies in the new JURA E line are revolutionizing the enjoyment of coffee. The One-Touch Cappuccino function on the Jura E8 Black one-touch espresso machine creates trend specialties such as latte macchiato, flat white and cappuccino at the touch of a button. The brewing process for ristretto and espresso has been 100% perfected. The Pulse Extraction Process (P.E.P.©) on the Jura E8 Black one-touch espresso machine is the only process of its kind in the world. It optimizes the extraction time and guarantees the very best aroma even for short specialty coffees.
A recent addition to Jura’s impressive line of coffee machines is the Impressa F8 which incorporates the best features from some of the new and older units of Jura. This Jura coffee machine is the first compact machine with a full color TFT LCD display. The 2.8 inch LCD display makes it a lot easier for users to understand what their machine is doing.

The Aroma G3 grinder uses conical steel burrs and six degrees of fineness to grind quickly, thanks to the perfected cutting angles that produce 60% less residual grounds. The result is a quieter grinder that preserves more of the flavor and aroma of the freshly ground beans while operating twice as fast. An integrated bypass doser allows for pre-ground coffee brewing.


I have had a Capresso C3000 super automatic for many years that I was starting to have some minor problems with (small water leak, tray sensors corroding) and decided it was time to get a replacement. I work from home and tend to drink coffee most of the day so I'm looking for something that works reliably and for a very extend period of time. I started looking at the new super automatics from the Jura Capresso based on the longevity of the old C3000. I will admit, it's the TFT display that really caught my eye on this one. I started looking thinking that I'd end up with a Z series, but the TFT display was what veered me over to this one.

To enable the filter and coffee machine to communicate, JURA uses modern RFID technology. Any machine fitted with the intelligent water system (I.W.S.®) recognises when a filter is inserted, automatically switches to filter mode and starts the rinsing process. When the filter capacity is nearly used up the machine prompts the user to change the filter. If the filter is not changed, the machine activates descaling mode. After a certain amount of use, the user is prompted to descale the machine. This can only be done when the filter is removed, so there is no more risk of user error resulting from misunderstandings.

×