You also get programmable push-button controls for milk, hot water and espresso outputs and given the fact that the 1003380 Accademia dispenses great beverages on demand, it’s great for those who don’t like to wait for long before their drink is ready. In total, there are 7 buttons that you can use in order to prepare one of the following drinks hot water, latte macchiato, latte, cappuccino, cafe lungo, cafe and of course, espresso.
Some machines can be quite slow to work their way through programmes, but Jura have put a lot of thought into minimising these delays. The water heating tends to be the cause of the waits, so the F8’s solution is to heat it as it passes through the internal pipes of the machine. The technical detail is a bit beyond us, but it seems to work well. If you want to know more and like the geeky detail, give ‘Jura Thermoblock’ a Google!

I have had several super automatic coffee machines in the past 10 years. My wife and I are coffee lovers and our favorite time every day is sitting down together when I get home from work and talking over a cup of our favorite coffee. It was our quest, after we were married, to find the perfect way to brew coffee. it couldn't be the french press. We travel with one since most upscale hotels don't have a coffee maker in the room, but at home we want a perfect cup each time and every time! Our journey started with Saeco and I am not hear to bash their products! I've had 5 Saecos and still own 3. One is our backup. One we use when we entertain and need more than one machine and the third is broken. The broken one was our favorite and newest. I cleaned it one day and when I was reinserting the brew group a little piece of plastic broke and poof, there goes the machine. Of course I'll get it fixed, but this is the type of stuff we have always encountered with Saeco! Great machine...cheaply built. I decided that I was upgrading and trying a different brand. After a tremendous amount of research I settled on the Jura F7 refurbished. An almost $2,000 machine for $699 and a warranty. I couldn't see a risk and have had great luck with buying refurbished items. Let me tell you from the moment it arrived it has been the easiest to use machine we've ever owned! Again, I loved our Saeco's, but they are nothing in comparison to the Jura!!! The speed in which it grinds, tamps, brews and cleans is literally 60 seconds. It is so much quieter than Saeco and cleaning does not involve the removal of anything. Open a lid...drop in a cleaning tab...put a large cup under the spout and BAM...it's cleaning. 15 minutes later my machine said "READY"! I pressed a button and out came another perfectly brewed cup of my favorite coffee from a little plantation in Hawaii!

This machine is awesome. Works great. Very easy to use, and VERY easy to maintain. That last part is key. Our previous machine, Capressa, was a pain to keep clean. This is far easier. Had it for about 6 months now and I've no complaints. The cleaning tablets (ordered on Amazon) are a bit pricey, but I have to imagine far less the sending the machine in for repair (which we did on our Capressa machine) Other than the coffee, cleanliness and overall use of the machine, the maintenance aspect is pretty easy. Put a tablet in the grinder and push the button. Done.
Use of and/or registration on any portion of this site constitutes acceptance of our User Agreement (updated 5/25/18) and Privacy Policy and Cookie Statement (updated 5/25/18). Your California Privacy Rights. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Condé Nast. Ad Choices.
In just 60 seconds, the Impressa C9 will steam or froth milk, tamp, grind, brew and clean itself. And if you’re looking to brew other drinks, you can use the hot water dispenser for tea, or to enjoy a cup of foamy hot chocolate. You have options to choose the cup size and strength of your coffee for a truly personal brew. Of course, the Impressa C9 also uses a water filter to ensure your coffee tastes as fresh and pure as possible.

If you are going to try to make other coffees with this machine, plan on doing some trial runs to get it right. Since you can adjust the amount of water and beans, you can make standard coffee if you want, but it’s not going to be as good as the espresso. Overall, we only recommend this to espresso drinkers, but it’s nice to know that you can make other beverages if and when you want a change.
Swiss-manufacturer Jura specializes in crafting high-end specialty coffee makers capable of competing with professional coffee shops. They are available in a wide range of pricing options, and if you’re in the market for one, there are some features to keep in mind. First, know what it actually brews. Jura machines are typically capable of making regular coffee, espresso, and other favorites, so be aware of what you are purchasing. Does it offer a high level of customization, and one-touch operation for those wishing to keep it simple? Is it easy to maintain and clean? Specialized features like adjustable coffee spouts and large-sized water reservoirs are also available.
Jura machines differ greatly in size and weight. The smallest machines can be tucked into a corner inconspicuously, but the largest machines take up large amounts of space, and require some room to operate. We will be keeping track of the dimensions to make sure that you don’t end up with a 40-lb. tank for your streamlined, urban apartment. We know, everything looks smaller on the internet!
Thinking that I must have received a defective unit, I requested an exchange from Amazon. I had a replacement unit the next day!! Amazon is amazing in this regard. The second unit worked well for the first week and then the same issue with the espresso not coming out and having to press the button to refill the pump started occurring again. More wasted espresso!!
I have had a Capresso C3000 super automatic for many years that I was starting to have some minor problems with (small water leak, tray sensors corroding) and decided it was time to get a replacement. I work from home and tend to drink coffee most of the day so I'm looking for something that works reliably and for a very extend period of time. I started looking at the new super automatics from the Jura Capresso based on the longevity of the old C3000. I will admit, it's the TFT display that really caught my eye on this one. I started looking thinking that I'd end up with a Z series, but the TFT display was what veered me over to this one.
That’s a pity because as auto-frothers go, it’s a very good one.  The one thing we’re not so crazy about is the fact that you’ve got to run plastic tubing from your milk source (you have to provide your own, by the way – you do not get one when you purchase the machine) to the frothing arm, which makes your very expensive coffee machine look like a high school science project.
To enable the filter and coffee machine to communicate, JURA uses modern RFID technology. Any machine fitted with the intelligent water system (I.W.S.®) recognises when a filter is inserted, automatically switches to filter mode and starts the rinsing process. When the filter capacity is nearly used up the machine prompts the user to change the filter. If the filter is not changed, the machine activates descaling mode. After a certain amount of use, the user is prompted to descale the machine. This can only be done when the filter is removed, so there is no more risk of user error resulting from misunderstandings.
The Micro 1 in many ways is the Micro 9’s little brother. This simple, ultra compact Jura machine features a sleek black design that is both minimal and modern. With the Micro 1, Jura set out to make their smallest unit without sacrificing the power and quality they are known for. And after out tests with a demo unit, we can safely say that they succeeded.

Jura does not make any budget-friendly machines, so you should come in expecting to make an investment. Prices range from $800 for a single cup machine, to above $5,000 for Jura’s top of the line model. You can always search for refurbished models, and Jura occasionally offers factory serviced machines that function like new, but have been returned to the company for unspecified reasons.
The ESAM3500.N features programmable menu settings, meaning that you can easily adjust the coffee temperature, water hardness, the 1h to 3h automatic shutoff, start time and clock. Regardless of how picky you may be when it comes to coffee, you’ll definitely get to prepare a delicious cup of your favorite blended thanks to the 5 settings for coffee strength, including extra strong, strong, regular, mild and extra mild. On top of that, there are 3 buttons which make it easy to choosing the cup size (large, espresso and ristretto).
The Impressa Z6 employs Jura’s innovative Pulse Extraction Process brewing system. As opposed to a constant flow, water is instead pulsed through the grounds in short intervals that extract greater intensity and aroma while shortening the overall brew time. With P.E.P., espresso and ristretto can be prepared with greater clarity and flavor than ever before.

The first machine I received never worked correctly. The milk would not steam and the espresso would start to come out and then stop. Upon stopping a message would display on the screen asking to press a button to fill the pump. This would occur 2-3 times before an expresso could actually be made. I experimented with several different grind settings, coffee strength, water temperatures, etc, but with no success. The machine continued to pump a few drops of espresso, asking to refill the pump, and waste the previous grinds. I literally wasted 2-3 cans of Illy espresso without ever getting espresso. In addition, with each espresso cycle, a large amount of water would precede any espresso. For example on a 1oz shot, about 0.1oz would be water that didn't run through the coffee.
When the milk is finally steamed on the dual element system, the machine is ready to continue making more espresso shots. Keep in mind that if you choose to get a single element machine, you’ll need to wait five minutes so that the boiler can cool off naturally and then run hot water through the steam wand for ten seconds in order to purge the boiler of steam.
The Jura J90 is an award winning design for a great automatic one-touch coffee machine. It is capable of easily producing at the touch of a single button the entire range of beverages from ristretto to latte macchiato. These specialty espresso drinks are selected using the Rotary Switch. This Jura machine has what they call an Aroma+ grinder which uses specially high grinding speeds to provide a superior coffee grind while preserving the full aroma of those beans. Jura’s revolutionary fine foam technology yields an extra light milk foam crown on every latte macchiato and cappuccino.
While it might seem odd to mention, some people do like to use pre ground coffee with a bean to cup machine, at least occasionally. A common reason is to get a cup of decaffeinated coffee from time to time, without needing to empty out the beans from the hopper, make a drink then switch it all back again. Similarly, if you have a brand of pre-ground coffee that you like as a change from your normal freshly ground beans every so often, the Impressa F8 has you covered.
As an anecdote, I once failed one of my shots, it happens to everyone. The biggest problem with that cup was that it had almost no crema. I sipped it anyway, I wanted to see how it was. I was absolutely stunned by the taste of that shot. The unique combination of tamping and grind size made that cup more flavorful. It just didn’t have enough crema. Never judge an espresso by its looks. This is why some people hate Nespresso with a passion, it is very consistent, and it gives you a great shot with ample crema every time, but it is never fantastic. I love “fantastic”, but for the convenience, I settle for good, so Nespresso is one of my favorite coffeemakers. If convenience is what you are looking for mostly, take a look at our article that compares capsule-based espresso machines.
The Micro 1 in many ways is the Micro 9’s little brother. This simple, ultra compact Jura machine features a sleek black design that is both minimal and modern. With the Micro 1, Jura set out to make their smallest unit without sacrificing the power and quality they are known for. And after out tests with a demo unit, we can safely say that they succeeded.
Jura machines differ greatly in size and weight. The smallest machines can be tucked into a corner inconspicuously, but the largest machines take up large amounts of space, and require some room to operate. We will be keeping track of the dimensions to make sure that you don’t end up with a 40-lb. tank for your streamlined, urban apartment. We know, everything looks smaller on the internet!
×